Ruger 10/22 & 77/22

 

— Below Services Apply to Ruger OEM Factory Rifles
— Prices do not include shipping
— Parts not included except where specified
— Non-Clark barrels are not included in our 1 MOA guarantee.

*It is legal to ship a gun directly to us for the purposes of repair or alteration.  You must include a typed letter containing an inventory of what you sent (e.g. magazines, etc…) to us, all work to be performed on your gun or parts, and contact information–phone and email address. Upon completion, the firearm must be sent directly back to the address from which it came.

 


Accuracy Work

10/22 and 77/22 Accuracy Package

We’ll put our Leupold 36X Vari-X III on your rifle and see what it can do at 50 yards with some of our good shooting ammunition. Ammo not included.

Accuracy Package $145.00
— Trigger Job
— Match Chamber
— Match Crown
— Tune Extractor
— Function Test

 

Additional 10/22 Accuracy Services
Service Price
Install Clark’s Exclusive Match Chamber / Crown / Tuned Extractor $95.00
Install Clark’s Exclusive Match Chamber / Crown $75.00
Match Crown – 45° cut touched up with cold blue $45.00
Cut and Recrown Barrel* – touched up with cold blue $50.00
Upgrade from plastic to OEM Metal trigger guard (black or silver) $25.00
Clark CNC Machined Metal Trigger (Black or Silver) $12.50
Cut Down to Specified Barrel Length (Minimum 16.25″) $35.00
Accuracy Test (not available on takedown models) $35.00
Install Bolt Handle $24.95

Installing Clark’s Exclusive Match Chamber is accomplished by “setting the barrel back.” We actually remove part of the back of the barrel in order to run our special 2 part reamer in your barrel. It is then necessary to modify (shorten) where the V-Block attaches to compensate.  Not available on 10/22 Takedown Model, 77/17, 77/22 Hornet or 77/22-77/17 with threaded receiver.

* No charge for this service if performed in conjunction with fluting.

 

10/22 Parts
Part Price
CNC 10/22 Clark Bolt Assembly (with factory trade in) $99.95
Bolt Handle $24.95

Although work on the stock is not included, we like to have the entire gun for this package so that we may function test and check the fit in your stock. A good stock fit is crucial to an accurate/reliable rifle and needs to be checked for best results.  As seen on Tom Gresham’s Gun Talk TV 

 

Additional 77/22 Accuracy Services
Service Price
Install Clark’s Exclusive Match Chamber / Crown / Tuned Extractor $95.00
Install Clark’s Exclusive Match Chamber / Crown $75.00
Cut and Recrown Barrel* – touched up with cold blue $50.00
Accuracy Test (not available on takedown models) $35.00

* No charge for this service if performed in conjunction with fluting.

 

77/22 Parts
Part Price
Overtravel screw $20.00

Not available on 77/17, 77/22 Hornet or 77/22 with threaded receiver.

Although we do not actually do any work on the stock, we like to have the entire gun for this package so that we may function test and check the fit in your stock. Stock fit is a major component to an accurate shooting 77/22.

 


Trigger Work

10/22 Trigger Job
Trigger Job $75.00
— Crisp 2.5- 2.75 lb. pull
— Overtravel screw installed in trigger
— Speed bolt release
— Hone hammer & sear engagement surfaces
— Trigger functions reliably with standard or high velocity 22 Long Rifle ammo

 

Additional Trigger Work
Service Price
Upgrade from Plastic to OEM Metal Trigger Guard (Black or Silver) $25.00
Clark CNC Machined Metal Trigger (Black or Silver) $12.50

The speed bolt release allows one hand bolt release. Instead of having to pull back on the bolt and operate the release, you only need to pull back on the bolt handle and the release automatically drops out of the way. A must for Sportsman’s Team Challenge. If a trigger job is all you require, you may ship only your trigger assembly. It’s easily removed by pushing out the two large cross pins in the receiver.

 

77/22 Trigger Job

17M2, 17HMr, 22 LR, 22 Magnum, 22 Hornet

trigger job $75.00
— Crisp 1.5 – 2 lbs pull

Optional Overtravel Screw + $ 20. If our trigger job is the only service required, you may send in your Receiver Assembly only. Since this is a serial numbered item, you must treat it like it’s a firearm for shipping purposes. The only advantage to this is to reduce the size of the box needed as well as having less weight. Return Shipping $ 35 by FedEx Ground to Continental US / $ 55 2nd Day Air to Alaska or Hawaii.

 


Match Barrel Installation

Model Price
10/22 Long Rifle or Magnum $50.00
77/22 Long Rifle or Magnum  $50.00
77/22 Threaded Receiver, 77/17 M2, 77/17 HMR, 77/22 Long Rifle or 77/22 Magnum  $150.00

Does not include barrel, trigger job, stock inletting, tune extractor, function or accuracy testing.

 


 Cutout Inlet Stock

10/22
Stock Barrel PRICE
Factory Walnut Sporter stock .920 Bull Barrel $65.00
Factory Synthetic or Wood stock .720 Midweight $95.00
Factory Walnut Sporter  stock .720 Midweight $65.00
Factory Synthetic or Wood stock .920 Bull Barrel $95.00
77/22
Stock Barrel Price
Factory Walnut Sporter or Laminate stock .920 Bull Barrel $65.00
Factory Walnut Sporter or Synthetic stock .720 Midweight $65.00

 


Additional Services

SERVICE PRICE
Thread Barrel ½” – 28  (.920 Steel Bull and Exclusive .720 Midweight Barrels) $125.00
Thread Barrel with Thread Protector (Part included) $150.00
Pillar Bedding with Aluminum Pillars – 10/22 or 77/22 $150.00
Modify Tactical Bolt Handle – Ruger 77/22, 77/17, 77/22 Hornet, 77/357 & 77/44 $130.00
Install Power Custom Scope Base in Black or Silver (Part included) $105.00
Drill & tap barrel $65.00
Drill Receiver Back for Cleaning $30.00
Tune Extractor – 10/22 $10.00
Accuracy Test – 10/22 or 77/22 (with MATCH GRADE ammunition. Ammo not included) $35.00
Function Test – 10/22 or 77/22 (with Federal Hi Velocity Ammo) $25.00

Note: Accuracy test using Leupold 36X scope